Subject:  Longivity Tea.  Part 2.                       Aug. 30, 2007.

  This mentions my friend Joseph Cater.  I don't know whether he is
still alive or not.

......................................................................
......................................................................

  A couple of years before the Zielinksy episode, I was told by an
American researcher about a device which consisted of a hermetically
sealed container.
  Inside that container was a rack having many circuit boards plugged
into it. The claim of the inventor was this device would produce many
kilowatts of f-ee power, based on some mysterious phenomenon
associated with energy flow in a vacuum.
  Recently, I had an opportunity to meet this American researcher
again and he provided me with more detail on this device. There were
5 units made and to the best of his knowledge, there is no patent.

  The inventor of the device was Charlie C-ro. The units were built
in the area of Spruce Pine, North Carolina.
  That's all I have at the present time, so if you know anything about
this inventor (Ca-o) or the technology of energy flow in a vacuum,
please post to
jdecker@keelynet.com
  Jerry Decker and I will append to this file so that all may study
it.
  There are indications that discharges in a vacuum or in a plasma
can produce amplified electrical feedback. Look in the FILES section,
under Energy and Chernetskii.

                   Power Tubes, F/E Circuits & Weirdness

  Years ago, Ken M-Neal discovered a most unusual phenomenon in a
particular model of vacuum tube designated an 866. This tube
produced some bizarre amplification or extraction of electrical
energy when excited.
  Ken says 32VDC was applied to the base, 1.5VDC was applied to
the grid and he got something on the order of 50,000 volts for an
output. When the tube was powered up, streaks of high voltage
streamed off the top, as if it was a Tesla coil. It was most
peculiar. Ken says he found only 3 of these out of the hundreds he
tested.
  When devices are manufactured, they are routinely 'burned-in' to
make sure each device (transistors, ICs, vacuum tubes, etc.) has
specific response parameters. This is to ensure that the device
will work properly when put into use.
  Sometimes, maverick devices get through which have response
parameters that are quite different from those advertised. The many
electronic surplus companies which sell 'bonus packs' or factory
seconds, are really selling components which are rejected by the
manufacturers because they don't match the parameters that are
needed to be sold to industry or are just factory overruns. It is
here that you will most likely find components with unusual
responses.
  Another friend said he knew a TI engineer who reported on an
unusual effect found with IR Leds. TI routinely plugs dozens of
these into a circuit, then pulses them with high current to check
their output and blow out the weak ones. This engineer claimed
they had a piece of toilet tissue hanging off a machine near the
LED rack. When one batch of LEDs were being pulsed, the tissue
paper moved as if a wind were blowing it.
  My friend wondered it if could be an anti-grav effect based on
Joseph Cater's (JW  I know Joseph and he is close personal friend.
He is a tremendous leader of people.  He in the past has had
about 30 people who follow his teachings or writings and they,
in honor of him, call themselves Caterites.) book 'Awesome Life
Force' where Cater claims gravity can be nullified by a certain
frequency slightly below what we call infra-red (IR).
  To my mind, because it was high current, it was more likely
a parametric upgrading to UV (ultraviolet) which would produce
an ionic wind to move the tissue. So you might want to buy and
test some of those 'bonus packs' of assorted IR leds, you might
find one or more of these mavericks.
  There is a very small private company which claims to have
developed a fr-e energy circuit that can be scaled up to 50KW,
suitcase sized versions. I asked if I had a copy of the circuit
diagram and the parts list, and I built the device and possibly
tuned it, would it provide overunity for me. I was told NO.
  The reason, because in this particular -ree energy circuit
(so I am told), each component must have a critical set of
response parameters. In a random batch of 50 transistors,
possibly only one would have the response needed. This is
required of each part used in the circuit, that it have specific
response parameters.
  Not only is each component response critical, but also the
layout of each component in the circuit, not because it runs
on microwaves (which it does not), but because the components
'harmonize' to create a regenerating, reinforcing, amplifying
condition when the circuit is powered.
  This is something that has recently been pointed out with
John Hutchinson experiments where multiple electrical machines
are put into a room and turned on. Within a matter of minutes
or hours, strange POLTERGEIST like phenomena begins to happen
in the room. Items lev-tate or are thrown across the room,
objects materialize, dematerialize or their characteristics
are altered.
  The idea is that the machines, being dynamic electrical
devices, have energy fields which somehow COMBINE to form a
primitive consciousness. As it becomes aware, it begins
excercising its abilities, much like a newborn child learning
to move its arms and legs. During this process, it either
loses control or gets angry enough to throw objects which
damage the very devices which constitute it, eventually
destroying itself.
  Though more likely the phenomena is a result of dynamic
nodes of force which are produced from interferences between
the various electrical fields. You can read this most
amazing file at;
http://www.altnews.com.au/nexus/Polter.html
  Hutchinson & Poltergeist Phenomena - 10/15/97.
  Wouldn't that be peculiar, that you had to create a certain
degree of 'consciousness' or 'responsiveness' in a circuit
to get it to work properly.
  This phenomenon of only one person being able to make
the machine work has been applied to John Keely, Lester
Hendershott, Henry Moray, the Hubbard generator, Edward
Leedskalnin and others.
  Victor Hansen, a Keely researcher since two days after
the flood and good friend, says Keely used a pocket device
of his own invention to allow others to operate his machines
when he was not present. I was allowed to inspect one of
this 'keys'. It consisted of a silver cylinder (probably
aluminum) that unscrewed from the middle. Inside, mounted
in the bottom of one of these halves, were several metal
bars. Victor said these bars were tuned to Keely's body
frequencies. Whenever Keely had to have work done where
he would not be present, he would have his assistant
place this cylinder in his pocket so the machine would
'recognize' him. Most peculiar.

                     H-ckok Free Energy Machine

  Several years ago, I heard rumors about a wonderful
f-ee energy device being developed in New Mexico by a lady
engineer by the name of Barbara Hi-kok. I never pursued
more information about her and was always puzzled why she
was not at conferences I attended, especially since I
heard she was out of Albuquerque, which is quite close to
Colorado and Texas.
  I have no details on the nature of the machine, but
seem to recall it was a motor/generator and that she did
have a patent. I typed her name in the IBM server and found
nothing back to 1971, though I am sure her patent was within
that period. If you have any information on this patent
or this particular invention, please send some pointers....
thanks... Jerry

  Updated Info on the Hic-ock machine - 12/31/97
  The following is information courtesy of
ted.zettergren@swipnet.se
  Ted Z-ttergren. You have a question about Barbara Hickok
Free Energy Machine in the file: Lost Technology - 12/06/97

  The electrical dynamo patented by Barbara Hick-x (1981) is
an interesting device. The design includes a central
rotating non-conductive cylinder into which small
cylindrical permanent magnets are placed.
  The interesting part is that the magnets are all
positioned with one pole outward, and located on two spiral
lines down the surface of the rotating cylinder. Barbara
claims that when properly designed, single-wound coils in the
proximity of these rotating magnets will exhibit power
transfers much higher than the power required to turn the
cylinder.
  Again, here is the idea of a spiral or cyclic texture
within the substance of existing energy fields. It must
be pointed out here that accurate measurements of high
frequency power can be difficult to make and results
can be inferred that are very much in error (Triner &
Hansen, N-SA, 1977). All measurements of input and output
voltages and currents must be very carefully performed.
http://patent.womplex.ibm.com/details?patent_number=4249096
  Hicko- Electrical Dynamo Patent - 4249096 abstract
and basic details.
  More Info on the Hickock machine - 01/02/98
  Barbara H (not sure of the spelling) gave a talk at the
Tesla confercnce about 5 years ago in Colorado Springs.

Part 2.

John Winston.  johnfw@mlode.com