| Subject: Re: Bald Mountain gate camera |
| From: "miso@sushi.com" <miso@sushi.com> |
| Date: 18/11/2009, 05:37 |
| Newsgroups: alt.conspiracy.area51 |
On Nov 17, 2:56 pm, rv58 <nv89...@yahoo.com> wrote:
On 17 Nov, 14:32, "m...@sushi.com" <m...@sushi.com> wrote:
On Nov 17, 8:28 am, rv58 <nv89...@yahoo.com> wrote:
On 17 Nov, 07:22, obviouslydelusional <obviouslydelusio...@gmail.com>
wrote:> On Nov 16, 10:42 pm, "m...@sushi.com" <m...@sushi.com> wrote:
http://www.lazygranch.com/images/bald/bald_gate_camera1.jpghttp://www...
I'd lean to number 1.
I go for No 1 also same at G lake rd a dummy there to no leads to
power it.When out there last year.
They would only need the ground sensors to tell them you were
around,another sensor later on would confirm direction.They're just
dummies,most would just see them as real.
rv58
Well at one time they had a real camera there since I assume the PTZ
wasn't a fake. If it was a dummy, then they would put a dummy at every
border crossing, right?
Well, I guess I have to go back there some day and set up the
telescope and get more detail. Same for the front gate. As I mentioned
in some other post, the gear at Road Block Canyon has been removed.
I'm not saying you are wrong,they were working cameras but many now in
disrepair so just leave 'em.will fool most.I see on the
Dreamlandresort site they say the solar panels were taken away & in
their pics you can see that there is no way they are powered.
Are some really close so you can get near to them or is it telescope.
Well this makes sense then. I could have sworn I had see solar cells.
You can get very close to the cameras at Bald Mountain. Certainly
50ft, probably less. That is way close for a telescope. I'm not sure a
reflector would focus at say 20ft. I know you can do that with a
refractor since it is easy to add spacers at the back. If I can find
it, I'll upload some photos of a $20 bill that I use for a photo
target. You can photograph the serial number of a dollar bill from
about 200ft.
Getting back to the bald camera, it looks like the mount for the
microwave is pointing downward. Unless it is an offset dish inside it,
that doesn't make sense.