| Subject: I have built the Howard Menger Ufo . |
| From: Cyrrex@tiscali.it (Cyrrex) |
| Date: 11/09/2003, 13:07 |
| Newsgroups: alt.paranet.ufo |
Remember these words?It's Howard Menger
speech about his anti-G device contruction...
----------------------------------------------------------------------------
Using a 24 inch plywood base I drilled a hole half way thru the
center. In the hole I securely placed a carbon rod of a broken
flashlight cell.
Next I obtained a large nail of like diameter and wound the nail with
50 turns of very fine copper wire. I slid the finished coil off the
nail the unwound ends of wire were about 8-10 inches long.
I soldered 2 extra connections one from the top and one from the
bottom: 2 of the ends were connected to a small penlight battery. I
stapled some of the wires to the wood base to hold the assembly in
position.
Next I took the brass cap off a larger flashlight battery cell and
glued it to the exact center of a 10 inch aluminum disc which was then
placed in a balanced position on top of the carbon rod.
The four ends of the wire pointed at the edge of the disc directly
opposite to each other to form a cross approximately 1/8 of an inch
from the disc edges. All was set up in the imaginary shape of a
pyramid. I made 2 connections at the bottom of the apparatus which
apparently completed the circuit.
The disc immediately was enveloped in a bluish spinning light then it
rose from the platform went thru my 12 foot ceiling and back down
again destroying that model. Did the electrons which came from the
small battery start a reaction in the atmosphere which took over once
the system was primed. Later the experiment was duplicated to the
extent that the disc glowed but never did it move.
------------------------------------------------------------------------
I have tried to build this model but don't work,but..
I smell a strong odor of ionized air,like a Tesla Coil in function...
Probably ions generate the bluish spinnig field...
There is something true in the words of Howard Menger,but I need more
info..
Is there someone that can explain me what happened?
Someone have successiful replicated this device?In what manner?
Thank you.