| Subject: Re: Gravity NEUTRALIZING Air/ Spacecraft, or ZERO/REDUCED Gravity Chamber |
| From: "Onno Westerman" <o_wester_@planet.nl> |
| Date: 25/06/2004, 22:41 |
| Newsgroups: sci.physics,sci.astro,alt.sci.physics.new-theories,alt.paranormal,alt.paranet.ufo |
<rem61704@aol.com> schreef in bericht
news:8a60aed7.0406221149.22617125@posting.google.com...
The ZERO/REDUCED-Gravity Chamber described below has obvious
potential applications for Chemistry, Biology, Biophysics,
Biochemistry, Medical Research, etc., allowing experiments which now
can be done ONLY on the Space Shuttle or Station, AT GREAT EXPENSE !
Gravity-NEUTRALIZING Air/Spacecraft
or ZERO/REDUCED-Gravity Chamber
NASA should build an experimental spacecraft based on
U.S. Patent #3,626,605, titled "METHOD AND APPARATUS FOR
GENERATING A SECONDARY GRAVITATIONAL FORCE FIELD", awarded to
Inventor Henry W. Wallace on Dec. 14, 1971. [$3.00 per
complete copy from U.S. Patent Office, 2021 Jefferson Davis
Hwy., Arlington, VA 22202; correct 7-digit patent number
required. Or try getting it via your local public or
university library's inter-library loan dept..]
In the patent, Figs. 7A and 7B are basically side views
of a gravity-NEUTRALIZING FLYING SAUCER, or, if anchored to
the ground, a ZERO-GRAVITY CHAMBER [which could have MANY
possible GROUND-level applications for science, medicine,
manufacturing, etc.]. Each oval diagram shows a motor
spinning a central disc at a very high speed, about 28,000
RPM, and also rotating two other discs sandwiched around the
first disc, via gears, at a much slower speed, perhaps 2,800
RPM, in the opposite direction. The two outer discs have
extensions [counter-balanced via off-center axis] that, as
they rotate, alternately make contact with two wide
extensions from opposite walls of the spacecraft. The
central disc should have shallow spiral-shaped grooves on
both sides for air-bearings, to allow the needed very close
contact with the two outer discs.
I should clarify that each of the two outer discs has
ONLY ONE [counter-balanced] extension, each one pointed
opposite (180 degrees) the extension of the other disc.
VERY CLOSE CONTACT must be made as the disc extensions
slide past the wall extensions in order to conduct the
"Kinemassic" Energy (term coined by the Inventor) from the
discs to the walls in an ALTERNATING CIRCULATION.
The most important factor making it work is that the
discs, extensions, and outer walls of the spacecraft MUST be
made of any material(s) in which a very large majority of the
atoms are of isotopes having "HALF-INTEGRAL ATOMIC SPINS",
such as copper (3/2). All other parts, etc., should have a
minority of such atoms. [See the appropriate column of the
table of isotopes in the latest edition of "The Handbook of
Chemistry and Physics."]
Experimenters should use one motor to spin the center
disc [Start small, such as only one or two feet in
diameter.], and a 2ND SEPARATE motor to rotate the two outer
discs, so their relative speeds can be varied to establish
the needed conditions for PROPULSION of the spacecraft via
"NEGATIVE WEIGHT" (with the spacecraft's "Kinemassic" field
seemingly PUSHING AGAINST the earth's gravitational field,
etc.).
If we have to put up a space station, establish Moon
bases, go to Mars, rendezvous with comets, etc., WHY DO IT
THE HARD WAY ?!
Your favorite university or research company could make
a BIG NAME for itself by making a small model of this work.
For more information, answers to your questions, etc.,
please consult my CITED SOURCES.
Robert E. McElwaine
B.S., Physics and Astronomy, UW-EC
http://members.aol.com/rem547 PLUS
http://members.aol.com/rem460
P.S.: PASS IT ON !
"EVERYTHING you know is WRONG."
"The Truth IS stranger than fiction."
"The Truth is ALWAYS the FIRST CASUALTY OF WAR."
"OFFICIAL LIES are ALWAYS the BIGGEST LIES OF ALL."
"The more things change, the more they STAY THE SAME."
They have already in there possesion several antigravity craft, also for
space travel... and they are already fly in space with those things..... so
nothing new... they had them probably already in the sisties... !