| Subject: Gravity-NEUTRALIZING Air/ Spacecraft, or ZERO/REDUCED Gravity Chamber |
| From: rem460@aol.com |
| Date: 07/11/2007, 00:53 |
| Newsgroups: sci.physics,sci.astro,alt.sci.physics.new-theories,alt.paranormal,alt.paranet.ufo |
5>
The ZERO/REDUCED-Gravity Chamber described below has obvious
potential applications for Chemistry, Biology, Biophysics,
Biochemistry, Medical Research, etc., allowing experiments which
now can be done ONLY on the Space Shuttle or Station, AT GREAT
EXPENSE !
Gravity-NEUTRALIZING Air/Spacecraft
or ZERO/REDUCED-Gravity Chamber
NASA should build an experimental spacecraft based
on U.S. Patent #3,626,605, titled "METHOD AND APPARATUS
FOR GENERATING A SECONDARY GRAVITATIONAL FORCE FIELD",
awarded to Inventor Henry W. Wallace on Dec. 14, 1971.
[$3.00 per complete copy from U.S. Patent Office, 2021
Jefferson Davis Hwy., Arlington, VA 22202; correct 7-
digit patent number required. Or try getting it via
your local public or university library's inter-library
loan dept..]
In the patent, Figs. 7A and 7B are basically side
views of a gravity-NEUTRALIZING FLYING SAUCER, or, if
anchored to the ground, a ZERO-GRAVITY CHAMBER [which
could have MANY possible GROUND-level applications for
science, medicine, manufacturing, etc.]. Each oval
diagram shows a motor spinning a central disc at a very
high speed, about 28,000 RPM, and also rotating two
other discs sandwiched around the first disc, via gears,
at a much slower speed, perhaps 2,800 RPM, in the
opposite direction. The two outer discs have extensions
[counter-balanced via off-center axis] that, as they
rotate, alternately make contact with two wide
extensions from opposite walls of the spacecraft. The
central disc should have shallow spiral-shaped grooves
on both sides for air-bearings, to allow the needed very
close contact with the two outer discs.
I should clarify that each of the two outer discs
has ONLY ONE [counter-balanced] extension, each one
pointed opposite (180 degrees) the extension of the
other disc.
VERY CLOSE CONTACT must be made as the disc
extensions slide past the wall extensions in order to
conduct the "Kinemassic" Energy (term coined by the
Inventor) from the discs to the walls in an ALTERNATING
CIRCULATION.
The most important factor making it work is that
the discs, extensions, and outer walls of the spacecraft
MUST be made of any material(s) in which a very large
majority of the atoms are of isotopes having "HALF-
INTEGRAL ATOMIC SPINS", such as copper (3/2). All other
parts, etc., should have a minority of such atoms. [See
the appropriate column of the table of isotopes in the
latest edition of "The Handbook of Chemistry and
Physics."]
Experimenters should use one motor to spin the
center disc [Start small, such as only one or two feet
in diameter.], and a 2ND SEPARATE motor to rotate the
two outer discs, so their relative speeds can be varied
to establish the needed conditions for PROPULSION of the
spacecraft via "NEGATIVE WEIGHT" (with the spacecraft's
"Kinemassic" field seemingly PUSHING AGAINST the earth's
gravitational field, etc.).
If we have to put up a space station, establish
Moon bases, go to Mars, rendezvous with comets, etc.,
WHY DO IT THE HARD WAY?!
Your favorite university or research company could
make a BIG NAME for itself by making a small model of
this work.
For more information, answers to your questions,
etc., please consult my CITED SOURCES.
Robert E. McElwaine
B.S., Physics and Astronomy, UW-EC
http://members.aol.com/rem547 PLUS
http://members.aol.com/rem460
Preserve BOTH on CD-R and PRINT-OUTS
ALSO http://www.geocities.com/remspiral7/
P.S.: PASS IT ON !
"EVERYTHING you know is WRONG."
"The Truth IS STRANGER than fiction."
"The Truth is ALWAYS the FIRST CASUALTY OF WAR."
"OFFICIAL LIES are ALWAYS the BIGGEST LIES OF ALL."
"The more things change, the more they STAY THE SAME."