Subject: Re: Old hardware help required.
From: AthlonRob
Date: 20/09/2003, 21:57
Newsgroups: alt.sci.seti

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
NotDashEscaped: You need GnuPG to verify this message

On Sat, 20 Sep 2003 11:37:54 +1200, ~misfit~ <misfit@'SPAMTRAP'orcon.net.nz> wrote:

I need help with this latest one.

As I'm sure you're aware... it's all a process of elimination.  :-)

Find a piece of cardboard big enough to set the motherboard on.  Remove 
the board, place it on the cardboard, with only RAM, CPU, and video card 
plugged in to it.  I'd blow off any dust that's on there, too, just for 
shits and giggles.

Plug the powersupply in to the board... and only the board (not any case 
fans or drives).  Plug your monitor into the video card and see if you 
get any output.  No?  Then we limited it to RAM, CPU, video card, 
motherboard, or PSU.  No chance of a short when it's on cardboard.  :-)

My money is on the motherboard or PSU... I've just never had a RAM chip, 
CPU, or video card just 'go out' on me like that.  There's always been a 
reason.

Dead drives can fry a lot of things, BTW.  I had a dead hard drive fry 
two motherboards and two PSUs before I realized that was the cause.  For 
whatever reason, one of those two systems recovered by itself after 
sitting for a few months (and is now my server).  Be careful with 
potentially dead hard drives.

Good luck.

-- Rob | If not safe, Email and Jabber: | one can never be free. athlonrob at axpr dot net | -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/bL9Ahm6KEoOOAe0RAvYeAKDfIoVO18tqRfoDFl2v1LSEkv8AdACglAN6 B4bk7UJsf3/zzbfyIcbL0eo= =vUvo -----END PGP SIGNATURE-----