zig wrote:

Well, I shut the pc down, really cleaned the insides well.  There was _some_ dust.  Removed a drive that was not being used.  Moved all the cables out of the way of the fan's airflow.  Replaced 1 fan and installed an additional fan.  3 case fans now, 1 in the front, 1 on the side and an exhaust fan up top.  Replaced the CPU fan.  Finally I did what you guys told me to do.  I put the sides back on.

This thread started my temps were, mainboard 50C/122F and CPU 63C/146F.

I am SO very happy to report that the mainboard is 35C/95F and CPU 39C/102F right now.  (100% cpu)  WU's on this machine would take 4.25h before, now she's doing them in 3.75h.

I installed SetiQueue last night.  I followed the directions, but nothing much has happened.  Completed a couple WU's, but SQ has not yet pulled down any WU's.  I'll give SQ a few hours and see if it grabs any.  If not, I'll reinstall SetiMonitor.

Thanks to ALL the guys that helped me.  I am probably the #1 reason why truck drivers should not play with PCs.   <b>Kids, STAY IN SCHOOL! Don't end up like me.</b>  :)

Have a happy and safe Holiday everyone.  I really appreciate the lessons learned and your time.  I hope you/we find ET in 04.

Peace,
zig

Have you poointed your client at setiqueue?

if cli start with -proxy:127.0.0.1:5517
else there are some proxy settings in the menu somewhere