In article <r2ib405cv5k3vrdvn9o1edocjppege9b7o@4ax.com>,  f/fgeorge 
says...

What makes you think that Seti is actually working on the old unit as
well as the new one?

SetiSpy switches between work units.
One has been completed for 70% and the other for 66%. Also the reported 
workunitname changes.
When I compare the names to the log I already find an entry.

But now that you mentioned it, I took another good look, but the entries 
indicate that the Wu weren't completed. I thought they were.


2-3-2004 5:32:18 28no03aa.7910.32673.523558.45  6.928  24.420  0.687  
                 2.613 2.442 67.11% 
2-3-2004 7:04:32 28no03aa.7910.32673.523558.45  6.928  24.420  0.687  
                 1.773 1.538 45.55%

The only strange thing is that the second entry is at 45% and the first 
is at 67% completed. While the processtime is 2.4 hrs at the first and
1.5 hrs at the second. 

So the log is a bit confusing.

But still I can't understand why there are two units in progress.
I defined only one process.

-- 
Cheers,
Visje...