Subject: Re: P4 SAH problem
From: Mecallie
Date: 29/12/2004, 23:30
Newsgroups: alt.sci.seti

micronay wrote:
You were exactly right.
I did install a new all copper cooling fan rated for the 3.2 gHz processor.
However, even with this fan, the CPU temp jumps up to 80+ C within a few
seconds.
Guess I'm going shopping for the latest and greatest HSF.
Thanks
MCR

No problem :)

You could check if there is to much (or bad) cooling past on the heatsink first. Maybe the cooler is just fine but the heat does not reach it. If that doesn't do the trick: coolermaster works fine and is not that expensive :)

Greets,
Mark