On Sun, 09 Oct 2005 20:12:11 -0000, gheston@hiwaay.net (Gary Heston)
wrote:

In article <1128887208.930232.264310@z14g2000cwz.googlegroups.com>,
president731@yahoo.com <president731@yahoo.com> wrote:

I'm running SetiAtHome 3.08 and SetiQueue 3.03.2.2b on my home network.
I recently upgraded to a new isp, and the router I must use to get out
to the net requires dynamic ethernet addresses on my nics (my original
network setup used static addresses). Seti can no longer connect to
SetiQueue to return results and get new units to work on. What can I do
to get Seti and SetiQueue working once again? Thanks much.

First, get a UPS and plug your router into it. Otherwise, you'll have to
go through this every time you have a power glitch.

Check your SETI Queue system and determine what IP address it's been
assigned. Then, re-configure all your other systems to point their proxy
addresses to it.


Gary

Actually I solved my SetiQueue issues long ago by putting in the name
of the machine instead of the IP address. This has saved me many
headaches as I am on cable and have 22 machines on my router now, the
IP's change all the time.